Artillian LLC Tractor Attachments Logo
Credit Card Processing
John Deere Pallet Forks
Skid Steer Pallet Forks
-Need Help Choosing?

Fork Frame Attachments
Fork Tines
Storage Solutions
Grapple
Hydraulics

Work Light Horse Blinders
Deere 54 Plow Products
Backhoe Feet & Pads
JDQA Welding Bases
Testimonials
Technical Fork Info
Uses for Forks
Fixed vs Floating Forks
Friends of Artillian
FAQs
Contact


 
Artillian Products for the John Deere 54 Blade

 

What is Needed? |  54 Plow Adapter |  Extension Hose Kits | 54 Blade Cutting Edges | 54 Blade Extension Wings

 

Have you been less-than-impressed with the John Deere 54 Blade?
Well, we have a fix for that!

Turn that blade from a light storm attachment into being a One-Tool-For-ALL-Storms.  Our system mounts your Deere 54 Blade on your front end loader.  Further, you can then switch between your blade and your bucket in seconds for complete snow management throughout the winter. 

Be sure to also add one of our Cutting Edges and the Extension Wings to your 54 Blade to really bring it to life!

The products on this page are for the John Deere 54 Plow Blade used on the X465, X475, X485, X495, X565, X575, X585, X595, X700, X710, X720, X724, X728, X730, X734, X738, X739, X740, X744, X748, X750, X754, X758, 425, 445, 455, 1023E, 1025R, 1026R, 2210, 2305, 2025r, 2032R, 2320, 2520, 2720, 4010, 4100, 4110, 4115 tractors.  Some products do not fit all tractors mentioned.

 

These Images Show What you Need from Artillian and from John Deere to Use the Deere 54 Blade on Your Loader.

Click to enlarge

Click to enlarge

 

 

Here a brief demonstration video of our Deere 54 Plow Extension Wings, Snow Squeegee, 54 Plow Adapter and Diverter Kit.

 

 

Cost-Benefit Comparison Between Blower vs Plow vs
Bucket
vs Artillian Plow-on-Loader Solution

Click to enlarge

Click to enlarge
This information compares offerings from John Deere/Artillian being used for snow management.  It cannot consider the cost of components that have shared uses such as the loader, loader bucket, or Artillian pallet fork frame.  Costs shown are approximated for the 1 Series John Deere tractors.  Others are similar.

 

Artillian Adapters for the Deere Quik-TatchTM Hitch/54 Blade

These mount on Artillian Pallet Fork Frames (not other brands)

-Switch between your 54 Blade and your bucket in seconds.  No more getting down on the cold ground to change attachments!

-Leverage your Artillian Pallet Fork Frame into a year round tool!

-Add one of our cutting edges and extension wings and you can complete your work in roughly half the time of using a blower or using the 54 Blade mounted on the tractor frame.  Plus, you will be able to handle accumulations all the way from a dusting up to the heaviest storms with just one tool. 

-As a comparison, Snow Blowers are useless without at least a few inches of snow or in heavy wet snow and just make a mess in high winds, often blowing back on the operator.  They are expensive and have many costly moving wear parts.  Our system mitigates all of these limitations.

-Using the plow on the loader allows you to stack snow into piles and push drifts back as needed to prevent closing in as the season progresses.  

-By using this system instead of the OEM frame mounted plow installation, you can  fine tune the tilt angle of the blade for less blade trips and wheel lifts.

NOTE: These adapters require Extension Hoses (below) to connect the hitch angling cylinder to the tractor. Or, to keep full functionality of the loader and add the ability of angling your plow, consider installing one of our Diverter Kits.  If you plan to use other hydraulic attachments on your loader, such as our Grapple, a diverter kit will be required.  Installing one now will make your tractor ready for anything!

SUBCOMPACT Tractors - the Deere Front Quik-Tatch HitchTM for the
1023e, 1025r, 1026r, 2210 & 2305 Tractors

-These adapters mount on Artillian Pallet Fork Frames (not other brands)

-Includes the adapter, an adjustable solid link (replaces the lift cylinder) and all necessary mounting hardware.

-Can be centered on the pallet fork frame or offset to one side, used as a wing plow.

-MIG welded high strength USA steel & finished with a black dip coating to match your Deere Quik-TatchTM hitch.

To operate your plow angling cylinder, either an Extension Hose Kit or one of our Diverter Valve Kits are required.  See below.

Save $10   $249

Model#: 22-DFHA

COMPACT Tractors - the Deere Front Quik-Tatch HitchTM for the
2320, 2520, 2720, 2025r, 2032r, 4100, 4010, 4110 & 4115 Tractors

-Mounts on Artillian Pallet Fork Frames (not other brands)

-Includes the adapter, an adjustable solid link (replaces the lift cylinder) and all necessary mounting hardware.

-Can be centered on the pallet fork frame or offset to one side, used as a wing plow.

-MIG welded high strength USA steel & finished with a black dip coating to match your Deere Quik-TatchTM hitch.

To operate your plow angling cylinder, either an Extension Hose Kit or one of our Diverter Valve Kits are required.  See below.

Save $10   $259

Model#: 23-DFHA

 

Extension Hose Kits for use with the Artillian 54 Blade Adapters (above)

When using an Artillian 54 Blade Adapter (above), extension hoses are needed to operate your plow's angling cylinder.  These hoses install right on your loader alongside the existing hydraulics.  While using your plow, disconnect the loader curl hoses from the tractor and plug in the extension hoses.  Moving your joystick left & right will then angle your plow left & right.

-Includes one pair of fully assembled 3000 psi hydraulic hose assemblies with John Deere compatible 1/4" quick disconnect fittings, genuine color matching dust caps and plugs, cable ties, hook & loop storage straps and installation instructions.
This kit is for the 2210, 2305, 2320, 2520, 2720, 4100, 4010, 4110 or 4115 tractors and any others using the previous style John Deere dust caps/plugs

$179

Model#: HHK-DFHA-EC

This kit is for the 1023e, 1025r, 1026r, 2025r or 2032r tractors and any others using the current style John Deere dust caps/plugs

$169

Model#: HHK-DFHA-CC

Note: These Extension Hoses are NOT NEEDED if you choose to install one of our 3rd function Diverter Kits.  With a 3rd function, you can dump/curl your loader as well as angle your plow cylinder left/right.

 

Cutting Edges for the John Deere 54 Blade

-Non-metallic 1/2" thick cutting edges

-Double sided/Reversible.  When one side wears, flip it over for twice the life

-Includes all necessary hardware with installation instructions

-These fit the John Deere 54 Blade offered for the following tractors, possibly more: X465, X475,X485, X495, X565, X575, X585, X595, X700, X710, X720, X724, X728, X730, X734, X738, X739, X740, X744, X748, X750, X754, X758, 425, 445, 455, 1023E, 1025R, 1026R, 2210, 2305, 2025R, 2032R, 2320, 2520, 2720,4010, 4100, 4110, 4115

Rubber Snow Squeegee Reinforced Rubber Cutting Edge Rigid UHMW Cutting Edge

-Great for cleaning uneven surfaces such as heaved asphalt or delicate surfaces such as grass, compacted gravel, etc.

-Not favorable for packed snow or ice.  These work best if you can plow before the snow gets driven on by automobiles.

-Shares qualities of both of the other cutting edges.  Conforms to surfaces with increased tolerance to abrasion.

-Not ideal for packed snow or ice.  These work best for plowing before the snow gets driven on by automobiles, but will perform to some extent.

-Great for concrete or asphalt surfaces and tolerates harsh surfaces such as loose gravel, etc. 

-A quiet and longer lasting alternative to the OEM metal cutting edge.

-Great for packed snow and will handle some ice.


Click to enlarge

Click to enlarge

Click to enlarge

$49

Model#: ASN-54-SR

$59

Model#: ASN-54-RR

$79

Model#: ASN-54-PE

 

Extension Wings for the John Deere 54 Blade

-Widens the John Deere 54 Blade to 66"

-Covers the tractor footprint when blade is fully angled

-Deflects when encountering an object but otherwise move snow like a solid metal blade

-Can be used with the OEM Deere replaceable metal cutting edge, but work best with the Artillian Cutting Edges above.

The first set of these wings put into service are now four seasons old and still going strong!

Why are our Extension Wings made of rubber instead of steel?

BECAUSE WE DON'T WANT TO DAMAGE YOUR TRACTOR!

With rigid extensions or an otherwise wider blade, if you strike a solid object out at the tips of the blade, the shock on downstream components will be compounded vs a standard 54" blade.  Excessive stress is placed on your hitch, hydraulic cylinders, tractor frame, etc.  With our Extension Wings being flexible, there is no worry about such damage.  If you encounter something solid, they will simply flex out of the way and then spring back into place once past.

-Includes one matched pair of die-cut and edge beveled heavy duty reinforced rubber wings, all hardware for mounting, and installation instructions.

-Requires drilling 8 small holes in plow blade.

-For best performance, a new cutting edge is recommended at time of installation.

-These fit the John Deere 54 Blade offered for the following tractors, possibly more: X465, X475,X485, X495, X565, X575, X585, X595, X700, X710, X720, X724, X728, X730, X734, X738, X739, X740, X744, X748, X750, X754, X758, 425, 445, 455, 1023E, 1025R, 1026R, 2210, 2305, 2025R, 2032R, 2320, 2520, 2720, 4010, 4100, 4110, 4115

Save $10  $149

Model#: ASW-54

 


Artillian LLC Tractor Attachments Logo
Credit Card Processing
John Deere Pallet Forks
Skid Steer Pallet Forks
-Need Help Choosing?

Fork Frame Attachments
Fork Tines
Storage Solutions
Grapple
Hydraulics

Work Light Horse Blinders
Deere 54 Plow Products
Backhoe Feet & Pads
JDQA Welding Bases
Testimonials
Technical Fork Info
Uses for Forks
Fixed vs Floating Forks
Friends of Artillian
FAQs
Contact