Artillian LLC Tractor Attachments Logo
Credit Card Processing
John Deere Pallet Forks
Skid Steer Pallet Forks
-Need Help Choosing?

Fork Frame Attachments
Fork Tines
Storage Solutions
Grapple
Hydraulics

Work Light Horse Blinders
Deere 54 Plow Products
Backhoe Feet & Pads
JDQA Welding Bases
Testimonials
Technical Fork Info
Uses for Forks
Fixed vs Floating Forks
Friends of Artillian
FAQs
Contact


  Artillian Storage Solutions

Moving tractor attachments is easy for the tractor, but isn't so easy for us.  These storage solutions help make organizing your attachments safer and less back breaking.

 Fork-n-Bucket Cart - New!  |  Caster Carts - Gen 2  |  The Ballast Box Trolley

 

 

Fork-n-Bucket Cart - New!

Store your bucket while you use your forks, store your forks while you use your bucket, or store both of them while you use something else.  You can even use this cart to store your bucket and just the fork tines while using your fork frame for other things, such as our plow system or Grapple.  The smooth rolling caster wheels can each support 250 lbs giving a total smooth-rolling max-capacity of 1000 lbs.

These carts measure nearly 3 feet wide, over 2 feet deep, and are almost a foot tall. Weighing in at around 50 lbs, these massive carts provide stable portable storage for both your pallet forks and your loader bucket.  And it doesn't matter if your bucket has a tooth bar or a smooth cutting edge.  This cart will handle them all!

To use the Fork-n-Bucket Cart, just insert your fork tines into the tubes from one side, spin it around 180 degrees and set the bucket in place on top from the other side.  Then, rotate to whichever attachment you want, hook up, and go.  You can even hook onto the pallet forks and transport the whole assembly to another location!

-MIG welded steel construction -Provides maximum stability and dry storage
-Max total load of 1000 Lbs (250 Lbs/wheel) -May ship with wheels unattached
-All hardware is included -Electrocoated black finish

Now Includes Two Locking Caster Wheels!

Fork-N-Bucket Cart for up to 4" Wide Forks (100mm)
-Max fork tine dimensions: 4-1/2" wide x 2-1/2" thick.

Save $20  $289

Model#: BFD-04
Ship Wt: 60 Lbs

 

Pallet Fork Caster Carts

Artillian Pallet Fork Caster Carts were inspired by an owner of Artillian Forks, who asked about a way to more easily move his forks around his shop.  Just slide these carts all the way onto your fork tines, lock them in place, then lower and detach the fork set from your tractor.  Then, just roll away and store your set wherever you like.  Installation takes just seconds and you can store your fork set around a cabinet, up against a wall or under a work bench with other things between the forks.

The new Gen 2 Caster Carts offer larger wheels for even smoother rolling with a 500 lb weight capacity.  Plus, the newly rededesigned Caster Carts offer improved stability by tilting the pallet fork set forward.

-CNC cut, formed & MIG welded steel -Provides maximum stability and long trouble free life
-Max load of 500 Lbs/pair -May ship with wheels unattached
-All hardware is included -John Deere Green powder coat for long life

Here are the new Gen 2 Caster Carts being used on a pallet fork set with 24" tines (now discontinued) and a Backrest on the pallet fork frame - the highest center of gravity of all our fork sets.  We are able to roll it very easily!

Caster Carts for 3" Wide (80mm) Fork Tines
-Max fork tine dimensions: 3-1/4" wide x 1-3/4" thick.

Sale  $189

Model#: PFCC-3
Ship Wt: 26 Lbs

1 set of 2 carts

Caster Carts for 4" Wide (100mm) Fork Tines
-Max fork tine dimensions: 4-1/4" wide x 1-3/4" thick.

Sale  $199

Model#: PFCC-4
Ship Wt: 26 Lbs

1 set of 2 carts

 

The Ballast Box Trolley

Give your John Deere Ballast Box safe mobility around your garage! The Artillian Ballast Box Trolley is designed to keep the heavy John Deere Ballast Box low to the ground for safety when rolling.  It also provides a smooth-rolling true 1000 Lbs of capacity.  As a bonus, it adds another 50 lbs of ballast to your tractor, and, down low where it is most effective!

When the ballast box is not attached to the tractor:

-Keeps ballast box low to floor for best stability when rolling

-The trolley has 3/4" min ground clearance

-Elevates the bottom of the ballast box 1.5" above the floor, inhibiting corrosion

Click to enlarge

When the ballast box is attached to the tractor:

-Trolley has minimal affect on ground clearance when encountering changes in grade

-Adds about 50 lbs of rear ballast, down low to the ground where it is most beneficial

-When parked, the ballast box will stay up off of the floor to inhibit corrosion

Click to enlarge

-Attaches to your ballast box with 4 opposing screws and is designed to remain attached at all times.  Or, it can also stay loose and only be used as a storage cart, if desired.

-Makes connecting the ballast box to the tractor much easier.

-Best for use on solid floors, but also works on other surfaces such as plywood over a dirt floor.

-CNC cut and formed North American steel, MIG welded, electrocoated black, high quality swivel casters.  Designed and built for long life.

Save $10   $299

Model#: BBTC-6C
Ship Wt: 55 Lbs


Click to Enlarge

Fits the Ballast Box for all John Deere subcompact and compact tractors, such as: 2210, 2305, 1023E, 1025R, 1026R, 4010, 2025R, 650, 670, 4100, 4110, 2320, 4115, 2032R, 2520, 2720, 755, 750, 770, 4200, 4210, 855, 790, 3005, 3203, 3032E, 3038E, 850, 870, 4300, 4310, 3120, 955, 4400, 4410, 3033R, 3320, 3039R, 3520, 3046R, 3720, 950, 970, 4500, 4510, 990, 1050, 1070, 4005, 4105, 4600, 4610, 4700, 4710, 4120, 4044M, 4044R, 4320, 4052M, 4052R, 4520, 4066M, 4066R, 4720

 


Artillian LLC Tractor Attachments Logo
Credit Card Processing
John Deere Pallet Forks
Skid Steer Pallet Forks
-Need Help Choosing?

Fork Frame Attachments
Fork Tines
Storage Solutions
Grapple
Hydraulics

Work Light Horse Blinders
Deere 54 Plow Products
Backhoe Feet & Pads
JDQA Welding Bases
Testimonials
Technical Fork Info
Uses for Forks
Fixed vs Floating Forks
Friends of Artillian
FAQs
Contact